Applications:

  • Modulating, or 2 position control dampers.
  • Where maintenance is an issue.
  • Ideal and reasonably priced choice for replacing worn out common dampers.
  • Caution: In applications where the humidity level is unusually elevated, or where there are extremely high levels of dust and dirt particles, we recommend that the damper linkage and bearing system should be cleaned once a year. This can be done easily with the use of a domestic strength steam cleaner. The loosened dirt and water droplets can then be blown out with compressed air.

   Air leakage:

  • Leakage Class 1A at 1 in. w.g. (0.25 kPa) static pressure differential. Standard air leakage data is certified under the AMCA Certified Ratings Program
Series 1000
Low Leakage Air-Foil Control Damper
  • Aluminum extrusions contribute to a prolonged and rust-free operational life.
  • All aluminum damper supplied with extremely flexible silicone side seals and EPDM blade gaskets as standard.
  • TAMCO seals provide outstanding dynamic fatigue resistance that ensure sealing longevity.
  • Seals provide excellent resistance to weathering, compression set, and heat.
  • TAMCO’s dual bearing system is self-sealing, self-lubricating, and non-absorbent. (Caution: Never use any lubricants, such as grease or silicone on TAMCO dampers.)
  • This results in totally maintenance-free performance.
  • Standard blade depth is 6” (152 mm).

Products | Options | Accessories | Technical Data | Installation Guidelines
Product Schedules | Representatives | About Us | Contact Us
© 2014 T. A. Morrison & Co. Inc. All rights reserved.